Thank you for registering for the IDT International Digital Denture Symposium Hands-On Workshop.
*Inside Dental Technology is using CDEWorld as a vendor to facilitate registration.
Select a Hands-On Workshop:
Included in Registration Fee
September 28, 2019 | 2 PM - 5 PM
Hotel Information
For housing and reservation information at the Atlanta Marriott Marquis,
click here or call: 404-521-0000 and reference the IDT International Digital Denture Symposium.
Cancellation Policy
CDEWorld reserves the right to close registration when an enrollment limit is reached and to cancel, modify, or alter content or speakers for any course if circumstances necessitate such a change. If we find it necessary to cancel a course, a full refund will be granted. All attempts to contact registrants will be made as soon as possible in the event of a course cancellation.
In the event of inclement weather (such as a snow emergency) or other extenuating circumstances, CDEWorld may be forced to cancel a course. If a course has been cancelled, we will contact participants by the phone number and/or email address provided. You may call or email our office on the day of the course if you are uncertain of a course’s status.
A full 100% refund will be granted to those cancelling (by telephone or email) two weeks (September 13, 2019) or more in advance of the event. No refund will be issued for cancellations 10 days or less before the event (September 17-27, 2019). CDEWorld will not be held responsible for any losses due to travel arrangements made by the registrant.
Close
Design Your Digital Denture in the Cloud
Speaker: Valerie McMillan, DDS, MS; and Josh Rogers
Supported by AvaDent Digital Dental Solutions
Designing dentures digitally is a new world for many of us and it can be a challenge if you don’t have access to the right design software. Learn from the pros how they design dentures in only 15 minutes using the sophisticated software built with you as a dental professional in mind. You can eliminate arduous tooth-by-tooth setups and improve your efficiency with a top-down design approach. Start with global setup characteristics, adjust group characteristics, and then finalize your digital denture with esthetic individual tooth movement. Dr. McMillan will demonstrate real patient cases. In the second part of the workshop, you will connect to the cloud and use the denture design tools yourself. During the workshop, you will be guided by design experts. IMPORTANT: Attendees must bring wifi-enabled laptops with Google Chrome installed.
Learning Objectives:
1. Discuss how to quickly design dentures using CAD software.
2. Describe through hands-on practice how to use digital denture tools for tooth set-up.
3. Access and submit patient case orders using software.
Close
Applying Class 1/2/3 Approaches for Digital Dentures
Speaker: Robert Kreyer, CDT
Supported by Dentsply Sirona
During this comprehensive workshop, you will be introduced to Dentsply Sirona’s digital print material and 3D digital tooth line. The advantages of integrating Lucitone Digital Print for additive manufacturing solutions into your denture workflow will be discussed during this lecture and hands-on course. Workshop participants will set and bond Dentsply Sirona digital teeth to a Carbon printed denture with Lucitone Digital Print material. You will then take this denture to your laboratory for finishing, polishing, and final inspection of this revolutionary denture base material.
Learning Objectives:
1. Describe the rules of ridge relationships for arranging denture teeth
2. Discuss how to arrange denture teeth in a Class 1, 2, and 3 ridge relationship
3. Explore why Lucitone Digital Print material will revolutionize the denture market
4. See how to integrate the Dentsply Sirona/Carbon workflow into your production line
5. Discuss how Dentsply Sirona 3D materials and Carbon can improve your digital denture outcomes
Close
Experience the Full 3D Printed Denture Workflow
Speaker: Andrew Johnston, CDT
Supported by Kulzer
3D Printing is all the rage right now, and it is important to understand the total workflow—including scanning, design, and printing. In this course, attendees will learn about 3D printing technologies, capabilities, and benefits. Find out how it could integrate into your workflow to improve productivity.
Learning Objectives:
1. Use market research to see the trends of how printing is changing the landscape of dentistry.
2. Discuss the complete workflow of digital manufacturing by incorporating scanners, design software, 3D printers, and post-print processing.
3. Lute printed teeth to a printed base and enhance the esthetics using light-cured composites.
Close
See It, Touch It, Experience It!
Speaker: Marc Wagenseil, DD, RDT; and Maurice Whitlock, CDT
Supported by Amann Girrbach and VITA North America
As digital denture technology integrates itself into our professions, we are faced with a decision about whether to incorporate it or not. This 3-hour workshop has been developed as an interactive experience to introduce, educate, and demonstrate the procedures of digital dentures with CAD software. Participants will have the opportunity to see design and operational milling of a denture on a leading mill. Through scan, design, mill, and finish, each step will be discussed from the perspective of a clinician and technician exploring tips and trouble shooting. The concept is to leave the event with an understanding of the complete digital process and what dentists and technicians will require to prepare themselves. This is an interactive event with the opportunity to experience digital denture fabrication with a functional mill.
Learning Objectives:
1. Discuss intraoral tips to gain the correct information from a patient to reduce errors and re-milling (impression taking, bite registration).
2. Describe laboratory procedures with tips to effectively navigate the software design process.
3. Gain knowledge in on digital denture materials, how they can be integrated into your workflow, and how they will benefit the patient.
